Rosewill Webcam rcm 2655 v User Guide

Elegant Webcam 2.0Mega Pixel Built-in MIC W/UVC  
RCM-2655V  
User Manual  
 
Introduction  
Welcome to the world of digital imaging. The following information will  
help you to use your camera to its full capabilities.  
For viewing pictures or video, camera must be connected to your  
personal computer.  
This camera is support Microsoft Video Class and plug & play  
directly without driver.  
System Requirements for Device  
Pentium® P4 1.2G CPU  
Free USB2.0 port  
256MB RAM internal memory minimum  
500MB free hard disk space  
Internet connection  
CD-ROM drive  
Windows compatible sound card and speakers  
Windows® XP Service Pack II  
Windows Vista™ / Windows 7  
Note:  
1. If your system is Windows XP Service Pack I, please go to  
www.microsoft.com . It’s free to update your system to  
Windows XP Service Pack II.  
2. System requirement required by webcam only.  
3. Before using WCC3, please make sure you have Media Player  
V.9 or above.  
2
 
Package Contents  
PC camera  
CD-disc  
User Manual  
PC Camera Introduction  
3
 
Set up PC camera  
You may mount the PC camera to your laptop or stand on the desk.  
Plug the PC camera into the USB port of PC or laptop properly.  
4
 
Software Installation  
ArcSoft WebCam Companion 3.0  
1. Turn on the computer and insert  
CD installation Disc into your  
CD-ROM drive. Select and click  
“ArcSoft WebCam Companion 3.0”  
2. Choose Setup Language  
3. Click “Next”  
4. Click “Yes”  
5
 
5. Click “Next”  
6. Click “Next”  
7. Click “Finish”  
6
 
Software Installation  
ArcSoft Magic-i  
1. Turn on the computer and insert  
CD installation Disc into your  
CD-ROM drive. Select and click  
“ArcSoft Magic-i”  
2. Choose Setup Language  
3. Click “Next”  
4. Click “Yes”  
7
 
5. Click “Next”  
6. Click “Next”  
7. Click “Finish”  
8
 
Snapshot by ArcSoft WebCam Companion 3.0  
1. Click on the “WebCompanion 3.0” icon  
on the desktop.  
2. Click “Capture”  
3. Click “Capture” for capture image  
and the picture is saved.  
4. Click “Record Video” for  
recording.  
Note:  
The Snapshot button and its featuring functions are not supported  
under Windows Vista and Win7. To access this function, please  
use the bundled software -ArcSoft Webcam Companion 3.0  
9
 
Camera Specification  
Image Sensor  
1600x1200 pixels, CMOS  
Lens Specification  
White Balance  
Exposure  
F2.8, f=4.8mm, Fixed Focus Lens  
Auto  
Auto  
Frame Rate  
1600 x 1200 pixels @ 1~5fps  
1280 x 960 pixels @ 5~9fps  
800 x 600 pixels @ 15~20fps  
640 x 480 pixels @ 25~30fps  
Fixed focus, 30cm to infinity  
50cm to 100cm  
Focus Range  
Depth of Field  
PC Interface  
USB2.0  
Video Format  
Audio  
WMV  
Built-in microphone  
640x480/ 352x288 pixels  
Support Microsoft Video Class  
Win XP Service Pack II above  
Without driver  
Video Capture Res.  
System Requirements  
Snapshot  
By software  
Still Capture Res.  
Up to 8M pixels  
(by WCC3 interpolation)  
From USB port  
Power  
Bundled Software  
ArcSoft WebCompanion 3.0  
ArcSoft Magic-i  
Specifications are subject to change without prior notice.  
10  
 
Thank you for purchasing a quality Rosewill Product.  
warranty information and future support for your product.  
This symbol on the product or in the nstructions  
means that your electrical and electronic  
equipment should be disposed at the end of its  
life separately from your household waste.  
There are separate collection systems for  
recycling in the EU. For more information,  
please contact the local authority or your  
retailer where you purchased the product.  
11  
 

Radio Shack Clock 09A02 User Guide
Remington Electric Shaver 400 User Guide
Roberts Radio Cassette Player SRCD970 User Guide
Rosewill Power Supply RV380 2 FRB S User Guide
Russound Speaker Advantage Series User Guide
Salton Kitchen Grill GR20 User Guide
Samsung Stereo Receiver C560S User Guide
SanDisk Computer Drive MLC NAND User Guide
Sanyo Air Conditioner 09KHS71 User Guide
Sears Oven 93331 User Guide