QSC Audio Car Speaker K8 YOKE User Guide

K8 YOKE  
K Series Loudspeaker Accessory  
User Manual  
Yoke spacer 2 components  
M5 x 25 mm screw with thread locking patch 4 components  
Steel yoke bracket – side 1 1 component  
Steel yoke bracket – side 2 1 component  
M5 x 16 mm screw 2 components  
M5 split lock washer 2 components  
M5 flat washer 2 components  
M5 nut 2 components  
M8 x 25 mm screw 2 components  
M8 split lock washer 2 components  
M8 flat washer 2 components  
This yoke mount is specifically for mounting the QSC K8 loudspeaker to a structural support element (lighting or soundstage truss or other load  
bearing truss, etc.). It is not to be used as a wall mount or other attachment to non-load rated structure.  
IMPORTANT SAFETY PRECAUTIONS AND EXPLANATION OF SYMBOLS  
WARNING!  
Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, enclosures, transducers, brackets  
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the  
strength of the installation or placement. Any such condition severely reduces the safety of the installation and should be immediately  
corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected  
overloading. Never exceed the rating of the hardware or equipment.  
Consult a licensed, Professional Engineer regarding physical equipment installation. All local, state and national regulations regarding the  
safety and operation of equipment are understood and adhered to.  
Do not use this yoke bracket to attach the K8 to a wall or other architectural element!  
Attach the base of this yoke bracket to the load-bearing structure using appropriate load-rated hardware approved for the application.  
Install in accordance with instructions by QSC Audio Products, LLC instructions and under the supervision of a licensed Professional Engineer.  
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and  
maintenance (servicing) instructions in this manual.  
TD-000288-00-A  
© 2009 QSC Audio Products, LLC. All Rights Reserved. QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in  
the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.  
Patents may apply or be pending.  
*TD-000288-00*  
 

Radio Shack Two Way Radio HTX 404 User Guide
RCA Satellite TV System F27TF720 User Guide
Rival Toaster DC SWM169 User Guide
Roland Electronic Keyboard GR 700 User Guide
Roland Electronic Keyboard KR 103 User Guide
Samsung DVR SPC 6000 User Guide
Samsung Home Theater System HT Z510 User Guide
Samsung Printer ML 3050 User Guide
Scientific Atlanta Modem DPX110 User Guide
Sennheiser Headphones 502399 User Guide